Model: WS2811 LED pixel
light source: F8RGB*1
IC Model: WS2811 IC
Quantity: 50 LEDs / set
LED Shape: Round
Color: full color, 24-bit
Gray level: 256
Length: 11.5ft (3.5m) per set
Size: Please refer to the picture
The standard operating voltage: DC 5V
Power: 0.3W/LED (15W/Set)
Waterproof: IP68 waterproof
Connection: Red: +5V; White: DATA; Blue: GND
1) It comes without power supply and controller. You’ll need a controller such as an Arduino to use them.
2) The work voltage of the LED string must be 5V DC. Otherwise, it will be burnt out.
3) If you want to hook up more than one string, an external power supply is very necessary.
4) There are small arrows on circuit board to show the direction of the data flow. This will help you confirm the input and output end.
50pcs WS2811 LED pixels light
Frequently bought together
5V 10A Power supply:
SP105E Bluetooth Magic LED Controller:
SP103E Mini Wireless RF Remote Controller:
T1000S LED Controller:
256 brightness display and full 24-bit color display. Each LED can have its own color and brightness. You can control each LED individually and set it to any color or animation you want.
The WS2811 LED pixel work great with Arduino, FastLED library, Adafruit NeoPixel Library and Raspberry Pi. It is easy to program.
There are 3-pin JST-SM connectors on both ends. You can hook up the pixel strings one by one without soldering. Each pixel can be cut off without damaging the rest pixels.
IP68 waterproof. Weatherproof silicone wraps every LED pixel, protects it very well and makes it easy to clean. You can put them outdoor, even underwater.
Widely used to make led screen, led wall, advertising board, outdoor advertising signs and applied to hotel, KTV, bars, commercial street atmosphere lighting.